Featured in Hay and Forage Equipment-Other

 : 0 |   : 0

Twin Arm round bale wrapper Standard Equipment RDS Expert Controller RDS Expert Series allows full automation of bale wrapper as all functions are controlled through electro-hydraulic valves. Speed Control Valve The control valve allows the operator to adjust the speed of the satellite arm ensuring an accurate overlap. Dual Stretch Dispenser Aluminium dispenser maintains consistent stretch as well as allowing a quick changeover of stretch levels from 55% to 70%. Film Changeover Film rolls can be easily loaded into dispenser unit with unique locking mechanism, saving time and effort. Film Break Sensor In the event of a roll of film running out of plastic or breaking during the wrapping cycle, the operator is automatically alerted. On bale wrappers with two rolls of film, the wrapping cycle speed is automatically reduced when one roll is still operational, ensuring the correct overlap and allowing the operator to finish the cycle until the plastic roll is replaced. The electronic controller will resume where it left off in the event the operator needs to change the plastic roll during the wrapping cycle. Bale Stop Roller This acts as a bale stop when loading. During wrapping, this ensures the bale stays in the same position when being rotated. Cut & Start Hydraulic cut & start unit holds the film at the beginning of the wrapping cycle and cuts it at the end. Autostop The bale wrapper runs through the wrapping cycle and automatically finishes after a set number of rotations, ready for off loading. Double Driven Rollers Both rollers are independently motor driven to ensure a consistent rotation of the bale. Twin Tower Support Two tubular tower masts gives maximum strength and ensures the long life of the wrapper. Folding Satellite Wrap Arms A whole new concept in satellite bale wrapping. The wrap arms are split and hydraulically fold together from the central hinge point. Two Dispensers One Cut & Start As the twin satellite wrapping arms fold together, both dispensers pass the cut and start where both rolls of film are cut and held in the one cut and start. Twin Dispenser

 : 1 |   : 0

Wraps 6'6 round bales, 5'6 Square Balers, 20 HP Honda Engine, Lights, Up to 4 Bales Per Min., No Drive

 : 1 |   : 0

Self Loading, 30 Tower, Ask about $318. a month

 : 1 |   : 0

Self Loading, 30 Tower, Cable Control Ask about $318. a month

 : 1 |   : 0

Self Loading,End Tip,30 in Wrap,Very Low bales. LIKE NEW!

 : 3 |   : 0

Self Propelled, 3Cyl. Kubota, Hyd. Drive, Prominently 7500 Bales

 : 0 |   : 0

Wraps up to 3'x3' square bales up to 7' long, Wraps 4x4 and 5x5'6 Round Bales, Wrap Counter, Hydraulically Powered, Wrap Cutter, Min 30 HP. Trailered Unit

 : 5 |   : 0

Stainless Steel, Belt Elevator, Peanut Loader, Poultry Litter, Optional Lengths 28,32,36,40,44, and 48ft The 480 Series Elevator is an elevator designed to meet a variety of applications. Manufactured from 16 gauge galvanized steel or stainless steel it is a lightweight yet sturdy machine to help you load or unload more efficiently. Featuring a belt speed of up to 300 feet per minute it will definitely speed loading time. Its ball bearings can be greased regularly to keep them operating smoothly. The hand crank has a built-in self-activating friction brake assuring safer operation by eliminating the danger of the handle slipping out of your hand and out of control. Also available is the option of a trailer hitch allowing you to transport it from job to job. The axles also have quality ball bearings enabling you to tow the machine about at road speeds comfortably. Applications: Loading Peanuts Removing wood scraps Piling firewood Loading mulch Loading poultry manure Unloading fertilizer Recycling operations Your application

 : 1 |   : 0

Self Loading Rear side to side dump option Hydraulic cab controls New Belts Very Good Condition

 : 3 |   : 0

TANCO MODEL 580S SINGLE BALE WRAPPER W/ LOAD ARM AND END TIP ARM,S/N UNKNOWN $10,500

 : 1 |   : 0

28 Ft Belt Elevator, Hydraulic Drive, Peanut Loader, Poultry Litter, Optional Lengths 28,32,36,40,44, and 48ft The 480 Series Elevator is an elevator designed to meet a variety of applications. Manufactured of 16 gauge galvanized steel or stainless steel it is a lightweight yet sturdy machine to help you load or unload more efficiently. Featuring a belt speed of up to 300 feet per minute it will definitely speed loading time. Its ball bearings can be greased regularly to keep them operating smoothly. The hand crank has a built in self-activating friction brake assuring safer operation by eliminating the danger of the handle slipping out of your hand and out of control. Also available is the option of a trailer hitch allowing you to transport it from job to job. The axles also have quality ball bearings enabling you to tow the machine about at road speeds comfortably. Applications: Loading Peanuts Removing wood scraps Piling firewood Loading mulch Loading poultry manure Unloading fertilizer Recycling operations Your application .

 : 3 |   : 0

9ft Pickup Head,All Hyd. Drive,Belt and Pickup Fingers are in Excellent Cond. Machine has been used very Little and is in like New Condition,It is identical to the H and S units